Prestressed concrete pole mould/concrete pole steel mould

moulds for pre-stressed concrete electic poles/concrete pole steel mouldsSales Manager:Sally WuMobile:0086 15305399025    1.simple introduction of concrete electric pole making linePre-stressed Concrete Electric Pole Making Machine is a kind of mould equipment, which used for making a variety of dif

Featured Products

moulds for pre-stressed concrete electic poles/concrete pole steel moulds

Sales Manager:Sally Wu
Mobile:0086 15305399025
   
 

1.simple introduction of concrete electric pole making line

Pre-stressed Concrete Electric Pole Making Machine is a kind of mould equipment, which used for making a variety of different diameter and length of reinforced concrete poles and other cement products.

Pre-stressed Concrete Electric Pole Making Machine is operated by remote-controlled continuously variable motor. It runs smoothly and has a variable-speed range. So the production of concrete pipes and piles are good at quality.

The base of the machine is welded in box-type structure, sturdiness and durability. The bearings are sealed and reliable, long life. Random electric control equipment is complete and easy to use.

2. Working Principle  of concrete electric pole making line

1. Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.

2. Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.

3. The speed of separation is slow when the viscosity of slurry is high.

4. It is good for centrifugal sedimentation when the slurry density is different in each component.

3. Technical Parameter of concrete electric pole making line

top end inner diameter (mm)

Tread (mm)

Running wheel diameter (mm)

Length (m)

150

2000

600

7-12

170

2000

600

7-12

190

2000

650

7-15

230

2000

650

6-9

300 equal diameter

2000

600

6-9

350 equal diameter

2000

650

6-12

310

2000

650-780

6-15

4.Advantanges of concrete electric pole making line

1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).

2. Crack resistance can increase about 3~5 times.

3. Rigidity increases 1~3 times.

4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).

5. Good durability, can delay the existence and expansion of cracks.

6, Protect the environment on which human beings depend on for existence, and reduce the deforestation.

   
(1)concrete electric pole mould
Moulds for Pre-Stressed Concrete electric Poles/Concrete Pole Steel Moulds(2)  centrifugal spinning machine
Moulds for Pre-Stressed Concrete electric Poles/Concrete Pole Steel Moulds

(3)Feeding material for concrete electric pole making line
Moulds for Pre-Stressed Concrete electric Poles/Concrete Pole Steel Moulds

(4)Put steel bar for concrete electric pole making line
Moulds for Pre-Stressed Concrete electric Poles/Concrete Pole Steel Moulds

(5)Tension for concrete electric pole making line
Moulds for Pre-Stressed Concrete electric Poles/Concrete Pole Steel Moulds

(6) spinning and moulding
Moulds for Pre-Stressed Concrete electric Poles/Concrete Pole Steel Moulds
6.Warmly welcome to visit our factory.Shengya is ur best choice!

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours